Slim tuck carton
Use a folded pocket for an individual drive.

Electronics Packaging
A USB drive box is a compact printed carton with a pocket or strap that holds the drive clear of its connector or cap.
From $0.55 per box
Price for 1 box at 3 × 1.25 × 0.7 in (76 × 32 × 18 mm), in Smooth folding board, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.55 | $0.55 |
| 100 | $0.55 | $55.00 |
| 250 | $0.55 | $137.50 |
| 500 | $0.55 | $275.00 |
| 1,000 | $0.55 | $550.00 |
| 2,500 | $0.55 | $1,375.00 |
| 5,000 | $0.55 | $2,750.00 |
Small boxes for branded USB drives and presentation sets with a fitted channel and finger access.
A swivel drive and a capped drive need different retainers. Keep the connector and keyring loop clear of the restraint, and test whether the drive can be lifted out without bending the deck.
Our custom usb drive boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom usb drive boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Use a folded pocket for an individual drive.
Place the drive on a deck with a lift cut.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Full-color exterior, Matte or gloss varnish |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 3 × 1.25 × 0.7 in (76 × 32 × 18 mm), used for small capped USB drive. The smallest size listed here is 3 × 1.25 × 0.7 in (76 × 32 × 18 mm) (small capped USB drive) and the largest is 4 × 3 × 1 in (102 × 76 × 25 mm) (promotional presentation pack). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 3 × 1.25 × 0.7 in (76 × 32 × 18 mm) | Small capped USB drive |
| 4 × 3 × 1 in (102 × 76 × 25 mm) | Promotional presentation pack |
| 2.5 × 1 × 0.5 in (64 × 25 × 13 mm) | Compact size: small capped USB drive, travel or sample size |
| 3.75 × 1.5 × 1 in (95 × 38 × 25 mm) | Larger size: small capped USB drive with an insert or extra room |
Place the drive in its packed position and note the length of the cap or swivel arm. A loop for a keyring can add width at one end. Fit the channel around the body and keep the connector clear. Test how the drive sits when the carton lies flat and when it is stood upright in a display.
If a drive has a finish that can mark easily, check where the insert grips it. A wider finger cutout can let the recipient lift it straight up rather than pulling the case along a tight edge. Try removing and replacing it without bending the tray.
Put a card or a folded guide into its intended position in the sample. If it sits under the tray, give the tray a tab that remains visible after the drive is removed. Keep the tab away from the point where it might catch on the cap.
For a set with two drives, try fitting the longer one and removing the shorter one first. A divider can keep them separate without covering the printed faces. Check the full pack after tipping it onto its side. Loose parts should stay in the places staff can see before closing.
For a branded drive given at an event, put the event or client name where staff can see it in a stack. A simple end label can work for a range of names on the same box. Leave the opening and any ribbon pull clear of that label.
Open a folded proof from the recipient's side. Check the direction of the logo on the drive and any note under the lid. If the box is part of a larger kit, try lifting it out without pulling on the sleeve. Save the approved drive position with the print file.
Include the swivel arm, cap and loop.
Avoid small copy across a fold.
Lift the drive by its body while the cap or swivel arm stays in the packed position. If the tray forces you to pull on the cap first, move the grip or widen the finger recess. Check that the connector stays clear of the board when the drive is put back.
Put any printed card into the intended pocket with the drive in place. Check the end of the pocket when the box is on its side. A card that is free to move can slip below the tray and block the pull tab.
Handling marks such as this-way-up or fragile can be printed next to your logo; see shipping box symbols. See what a box will cost to ship with the dimensional weight calculator.
Pricing for custom usb drive boxes starts at $0.55 per box for 1 box at 3 × 1.25 × 0.7 in (76 × 32 × 18 mm), in Smooth folding board, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom usb drive boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom usb drive boxes.